Sectors
Built for the way your sector works
The same system serves every sector, but no two sectors run it the same way. Here is what changes offshore, onshore, on a turnaround and on a wind farm.
Sector 1 of 4
Offshore oil & gas
Offshore, the number of people on board is a hard limit, set by lifeboat seats and beds, and everyone arrives and leaves by helicopter or vessel. In an emergency there is nowhere else to go: the muster ends at the lifeboats.
POB is a limit, not just a count
Arrivals and departures are taken from the flight and vessel manifests, so the POB is right before people step off the helideck, and the installation always knows how close it is to its limit.
Two-stage muster, ending at the lifeboats
People are first accounted for at their muster points. If the incident escalates, a second muster at the lifeboats confirms each boat has the right people on board before launch, so no one is left behind.
Emergency teams muster first
Fire, rescue and medical teams report to their own emergency muster stations, so command can see straight away which response teams are ready, before the general muster is complete.
Bridge-linked installations and flotels
Where a platform is bridge-linked to another platform or a flotel, readers on the bridge record every crossing, so each person is counted on the installation they are actually on, and crossings are limited to those authorised.
Hazardous areas and open decks
Readers and muster stations in process areas are certified for Ex Zone 1, and on open decks over water, man overboard detection starts recovery sooner.
Sector 2 of 4
Onshore facilities
Onshore sites are larger and more open than an offshore installation, with many buildings, gates and contractors. The count that matters is persons on site, and in an emergency people go to assembly points, not lifeboats.
The count starts at the gate
Persons on site are counted at the site and building entrances, so staff, contractors and visitors are all included from the moment they arrive.
Large sites, long walks to muster
Where people may be a long way from an assembly point, area mustering detects them in buildings and zones without them doing anything, giving supervisors a first headcount before everyone has arrived.
Mustering wherever people gather
Mobile mustering on tablets lets marshals account for people at temporary or alternative assembly points, not just at fixed muster stations.
Gates, buildings and perimeters
Access control covers site gates, control rooms and restricted buildings, and intrusion detection raises an alarm when someone enters a restricted or hazardous area.
Contractor records kept in step
Links to HR and ERP systems keep personnel records, roles and permissions consistent, so large contractor populations do not mean manual updates.
Sector 3 of 4
Shutdowns & turnarounds
During a turnaround the workforce on site multiplies for a few weeks, most of it contractors, working to a fixed, time-critical schedule. Every extra day costs lost production, so the questions are both "is everyone safe?" and "is the work getting done?"
Temporary hardware, installed fast
DataWolf hardware is cable-free and battery powered, so readers can be installed for the duration of the job and taken away afterwards, with no cabling to run. It is certified for Ex Zone 2 and Zone 22.
Everyone counted in a temporary workforce
Hundreds of short-term contractors from many companies are included in the persons on site count and in every muster, with temporary credentials, so nobody is missed because they are new.
Hours in the work zones, not just on site
Time spent in each job’s work zones is measured against planned hours, so delays show up while there is still time to act, not when the schedule has already slipped.
Verified contractor hours
Automated attendance records mean contractor hours can be checked before they are paid, and records stay available for the post-job review.
Sector 4 of 4
Offshore wind
An offshore wind farm is many normally unmanned assets spread over a wide area. Technicians move between turbines, substations and vessels throughout the day, so the question is not just how many people are offshore, but who is on which asset right now.
Walk-to-work transfers logged
Every transfer over the motion-compensated gangway between the vessel and a turbine or substation is recorded, and only authorised people are allowed across, so each asset has a live, automatic manifest.
Who is on which asset
Tracking shows which turbines and substations are occupied, and by whom, so the vessel and the control room know where every technician is before the weather or an incident forces a change of plan.
Turbine and substation access
Access control limits each asset, and high-risk areas within it, to people with the right training and authorisation, and logs every entry and exit.
Back on the vessel
Because every transfer is recorded in both directions, the vessel can confirm at the end of the shift that everyone who went out has come back.
Talk to us
Tell us about your site
Tell us about your site and your schedule. We'll come back with how the system would fit and what it would take.